High Frequency Heating Shc40 1D Hot Elbow Machine

Median Frequency Elbow Making Machine For Carbon Steel Pipe Fittings High efficiency pipe bender

Product Description:

Hot forming elbow machine can produce different standard according the orders and different standard need different mandrel for production. And there are some special requirement for the beveling on the finished elbows. Mandrel elbow making machine also belongs to the hydraulic machine which use the hydraulic pushing press to make the the raw material pipe go forwards by the two hydraulic cylinder on the backside and the two cylinder connect with the oil box for the input and output the hydraulic oil.

Please find the following hot forming elbow machine photos:

1).Machine type:60 type-size from 1/2 to 2inch

2). Main Technical data of machine:

a. Main Ram Cylinder:ID 100mm, stroke:2m OD120MM

b. hydraulic pump:40scy plunger pump Motor: 7.5kw

c. Elbow type:1D, 1.5D, 2D,

Installation:

Elbow pusher

Elbow pusher mainly produces elbow pipe fittings of 1D and 1.5D.Elbow pusher mainly produces carbon steel and stainless steel elbow.The production mode of elbow pushing machine is mandrel and through the ball.The main characteristics of elbow pushing machine are simple operation, low cost and high efficiency.Elbow pusher can produce elbow diameter of 21mm-630mm, wall thickness of 3-30mm these models we produce elbow pusher can be done.Elbow push machine mainly includes: rack, table, side table, hydraulic press, electrical box and human control board and mandrel also known as horn.The structure of the elbow pusher is the integral frame structure.The overall design of elbow pusher is relatively compact and reasonable.The above is a brief introduction of elbow pusher for customers.

 Our team :

Our Client :

Contact:

Darcy dong

Email address: guozhong_darcy@pipefittingsmachine.com

WhatsApp/Wechat:  008615630731167